1)Good system design, the evaporation area is reasonably matching with air volume for best cooling effects (based on different climates, the supply air difference could be 5-15℃
2)Using high efficient cooling pads with large evaporation capacity, good cooling efficiency at 90%
3)Using high quality aluminum housing motor, with good heat dissipation, high protection grade, waterproof, moistureproof
4)With special airfoil fan designed for evaporative air cooler, large airflow with low noise.
5)The cooling pad frame could be disassembled easily for clean and maintenance
6)Original open water distribution system to ensure the water supply system is not blocked
7)With auto function, regularly remove dirt to ensure water clean. Cooling effects could be guaranteed and the cooling pad’s life could be extended, also maintenance could be reduced.
8)Self-developed high quality water pump ensures stable water supply. And water lack protection ensures that pump could be protected
9)Different models from small airflow to large airflow, which can meet different requirements in different applications.
1.Streamline appearance design, beautiful and more strong structure.
2.Slant water tank,make the drain outlet at the lowest place of the tank. While using drain function, the water flow can help washing the tank.
3.Integrated design of water distributor,more sealing propety.
4.Design one sink lever around the drain valve, the impurity could not take way by water, will stay by the side of drain valve.
5.Water pipe is installed built-in, to avoid pipe fall off or damaged to bring water into room.
6.With air damper to avoid hot air outlet in winter.
7.With flexible dis-assembly outer filter, easy to clean.
8.Using LCD or standard controller, easy to operate and understand.
9.The casing is made of high strength weatherability polymers which is anti-UV, anti-corrosion, anti-aging and resistance to deformation.
10.Using specifically designed axial fan, with large airflow, low noise, low energy consumption and wide applicability.
11.Using high quality aluminum housing motor, with good heat dissipation, high protection grade, waterproof, moistureproof.
12.Using high efficient cooling pads with large evaporation capacity, good cooling efficiency and easy to clean.
1.Intelligent group control: one controller can group control 40units.
2.Auto timer ON/OFF: 24hours*7days auto timer ON/OFF can be set.
3.Infrared remote control: remote control for ON/OFF, cool, vent, speed control and clean.
4.Fan speed adjustment: intelligently control air flow for ten speeds
5.Temp.&humid.sensor: indoor temp.&humid.could be set for auto control cool and ventilation modes
6.Trouble automatic diagnosis: the cooler’s running status is shown in the screen, for
7.Memory function when power OFF: the controller will record the running state when power is switched off, and when power is switched on ,the machine will start up automatically as previous running state.
8.Pre-cool function: the system will first start pump to wet the cooling pad with fan not working, and fan won’t start until the pre-cooling time finishes
9.Ventilation function: every time the fan will keep running N minutes in vent mode to dry the cooling pad after cooler is OFF
10.Auto control function for water inlet and outlet: water inlet and outlet time could be set to guarantee ventilation effects and air quality.
11.Auto clean: 1-99 hours auto clean can be set to remove dirt in the tank and extend the cooler’s life.
12.Water supply: with intelligent group control, water supply system is centralized to have regular removal of dirt, reduce failure rate and maintain best cooling effects.